Filter
Top Products
VQT2G44
68
Advanced (Recording pictures)
[REC] mode:
Taking Pictures using Auto Bracket
Maximum of 7 pictures will be recorded with different exposure settings following the
Exposure Compensation range every time the shutter button is pressed.
You can select the picture with the desired exposure among different exposures.
With Auto Bracket
[STEP]: [3•1/3], [SEQUENCE]: [0/s/r]
Set the drive mode lever to [ ].
Focus on the subject and take a picture.
• If you press and hold the shutter button, the number
of pictures that you set is taken.
• The Auto Bracket indication A blinks until the
number of pictures that you set is taken.
• The picture count is reset to [0] if you change the
Auto Bracket setting, change the setting on the drive
mode lever or turn the camera off before all the
pictures that you set are taken.
∫ Changing the settings for [STEP] and [SEQUENCE] in Auto Bracket
1 Select [AUTO BRACKET] in the [REC] mode menu. (P28)
2 Press 3/4 to select [STEP] or [SEQUENCE] and then
press 1.
1st picture 2nd picture 3rd picture
d0EV j1/3 EV i1/3 EV
A
DMC-GF1KPP-VQT2G44_eng.book 68 ページ ２００９年８月１７日 月曜日 午後１時１９分