Filter
Top Products
VQT2G44
84
Advanced (Recording pictures)
• You can also press the shutter button halfway to set.
Focus on the subject and take a picture.
• It will continuously take pictures by keeping the shutter button pressed when it is set to
burst mode. (Up to 3 pictures)
• When using a self-timer, up to 3 pictures with set film will be taken if the shutter button is
pressed. (It will operate same as [ ] even if it is set to [ ].)
• Multi film indication ([ ]) displayed on the LCD monitor/optional external viewfinder will
flash until all pictures of preset amount are taken.
Note
• [STANDARD] is registered in [MULTI FILM 1], [MULTI FILM 2] and [OFF] is registered in
[MULTI FILM 3] at the time of purchase.
• White Balance Bracket will be disabled when the Multi Film Bracket is set.
• Motion pictures are recorded with the settings for the [MULTI FILM 1] setting.
[REC] mode: ±´
Taking pictures by specifying the aperture/
shutter speed
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
Set the mode dial to [ ].
Rotate the rear dial to set the aperture
value.
• It will switch between aperture setting operation and
Exposure Compensation operation every time the
rear dial is pressed.
• Rotate the rear dial to display the [EXPO.METER].
(P125)
Take a picture.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
Set the mode dial to [ ].
Rotate the rear dial to set the shutter
speed.
• It will switch between shutter speed setting operation
and Exposure Compensation operation every time
the rear dial is pressed.
[ ] Aperture-priority AE
[ ] Shutter-priority AE
DMC-GF1KPP-VQT2G44_eng.book 84 ページ ２００９年８月１７日 月曜日 午後１時１９分