Filter
Top Products
VQT2G44
88
Advanced (Recording pictures)
[REC] mode: ¿
Taking pictures that match the scene being
recorded ( : Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [ ].
Press 3/4/2/1 to select the scene mode.
• You can also use the rear dial to select.
Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the
selected scene mode.
∫ About the information
• If you press [DISPLAY] when selecting a scene mode in step 2,
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
• To change the scene mode, press [MENU/SET], and return to above step 2 by pressing 1,
while selecting the scene mode menu [ ] by pressing 3/4/2/1.
• The scene mode flash setting is reset to the initial setting when the scene mode is changed and
then used.
• When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
– [SENSITIVITY]/Items other than [STANDARD] and [STANDARD] ( ) in Film Mode/
[FLASH SYNCHRO]/[METERING MODE]/[I.EXPOSURE]/[ISO LIMIT SET]/[DIGITAL ZOOM]
When taking pictures of people outdoors during the day, this mode allows you to improve
the appearance of the persons concerned and make their skin tones look healthier.
∫ Technique for Portrait Mode
To make this mode more effective:
1 Rotate the zoom ring as far as possible to Tele. (when a lens with a zoom function is
used)
2 Move close to the subject to make this mode more effective.
Note
• The initial setting for [AF MODE] is [š].
* [PORTRAIT]
DMC-GF1KPP-VQT2G44_eng.book 88 ページ ２００９年８月１７日 月曜日 午後１時１９分