Filter
Top Products
124
Changing Camera Settings
6
Caution------------------------------------------------------------------------------------------
• When [USB CONNECTION] is set to [MASS STR], you cannot use RICOH Gate La
to transfer camera data.
• When [USB CONNECTION] is set to [MASS STR], files can only be read from the
camera and cannot be written to or deleted from the camera.
• When [USB CONNECTION] is set to [MASS STR], Direct Print may not be available
for some printers. In such cases, select [ORIGINAL] instead.
To change the USB setting, follow the steps below.
1
Display the SETUP menu.
• For the operating procedure, see P.107.
2
Press the " button to select [USB CONNECTION] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Note ----------------------------------------------------------------------------------------------
For how to download images from the camera to a computer using the USB cable, see
P.149-153.