Filter
Top Products
182
9
Using the GPS Function
4
Press the !" buttons to select
the desired destination device.
• If the desired destination device is not
listed, press the ADJ. button to search
for a Bluetooth
®
GPS unit in your
vicinity.
• Select a destination device and press
the $ button to display information
about the destination device.
• To delete a destination device from the list, select the device and press
the D (Delete) button.
5
Press the MENU/OK button.
• The connection status appears. Pressing the DISP. button cancels the
operation.
• If a passkey is required to connect to the destination device, a
message appears prompting you to enter the passkey. (GP.162)
• If the connection fails, an error message appears and then the
shooting screen appears. For details about the error messages, see
P.222.
• When a connection is established to a
Bluetooth
®
GPS unit, the Bluetooth
®
antenna icon, GPS information and
GPS antenna icon appear on the
shooting screen.
Note ----------------------------------------------------------------------------------------------
The most recently connected destination device appears at the top of the list of
destination devices.
Disconnecting serial connection
after manually connecting to a device -----------------------------------------------
Turn the camera off to disconnect serial connection.