Ricoh 500SE Digital Camera User Manual


 
If you are using the camera for the first time, read this section.
45
1
Turn the mode dial to 5/K.
2
Press the t (Self-timer)
button.
The Self-timer symbol appears on
the screen.
The [10] to the right of the symbol
indicates the number of seconds.
In this case, if you press the
shutter release button, the camera
will shoot after 10 seconds.
Each press of the t (Self-timer) button changes the self-timer
setting in the following order: 10 sec, 2 sec, and Self-timer Off.
3
Press the shutter release button.
The focus is locked, and the AF auxiliary light blinks when the
self-timer starts.
Note ---------------------------------------------------------------------------------------------------
Once the picture is taken, the self-timer turns off.
When the self-timer is set to 2 seconds, the AF auxiliary light does not blink.
t Using the Self-Timer
You can set the Self-timer to shoot after either two or ten seconds.
A setting of two seconds is useful for preventing camera shake.