Filter
Top Products
126
Changing Camera Settings
6
The My Setting function allows you to make your desired settings to
be used at power-on. For example, when a digital camera is used
in common by multiple persons, you can use the camera without
regard to the settings made by the person who used the camera
previously because the camera settings are restored to your
settings each time the camera is turned on.
Two types of My Settings can be registered.
To register the current camera settings as My Settings, follow the
steps below.
1
Change the camera settings to the settings to be
registered as My Settings.
2
Display the SETUP menu.
• For the operating procedure, see P.107.
3
Press the " button to select
[REG. MY SETTINGS] and
press the $ button.
• A confirmation message appears.
4
Select [SETTING1] or
[SETTING2] and press the
MENU/OK button.
• The current camera settings will be
registered and the display returns to
the SETUP menu.
• If you do not want to register them,
press the DISP. button.
5
Press the MENU/OK button.
Registering the Power-on Settings
(REG. MY SETTINGS)