Filter
Top Products
215
10
Using the Wireless LAN Function (Only for Caplio 500SE-W)
1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
• Check that [CHANGE COM] is set to [W-LAN]. (P.193)
2
Press the " button to select [QUICK SEND MODE] and
press the $ button.
3
Press the !" buttons to select
[1TOUCH] or [2TOUCH].
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
1
Check that the destination device (computer) is turned
on.
2
Turn the mode dial to 5/K and shoot the picture.
• While the image is displayed after shooting, a screen appears
confirming whether to send the file. (GP.116)
3
Press the MENU/OK button.
• Transfer of the image to the
destination (GP.220) specified in
[SEND TO] on the Expanded Settings
menu begins.
• Once the transfer is completed, the
camera returns to shooting mode and
remains connected to the destination
device. You can change to playback
mode or voice memo mode or remain
connected to the destination device
until the camera is turned off. The
wireless LAN antenna icon appears
on the LCD monitor while the camera
is connected.
Using Quick Review Send
When [QUICK SEND MODE] is set to [1TOUCH]