Filter
Top Products
171
8
Using the Bluetooth
®
Function
Immediately after you shoot a still image, you can send that image
to another device. This is convenient if you want to send images to
a predetermined device.
You need to set [QUICK SEND MODE] on the Expanded Settings
menu beforehand.
Caution------------------------------------------------------------------------------------------
You can only use the Bluetooth
®
function to send still images (.JPG). You cannot send movies (.AVI)
or text (.TIF). If there are still images with sounds (.JPG and .WAV), only still images (.JPG) are sent.
1
Display the Expanded Settings menu.
• For the operating procedure, see P.155.
• For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the
Expanded Settings menu. (GP.193)
2
Press the " button to select [QUICK SEND MODE] and
press the $ button.
3
Press the !" buttons to select
[1TOUCH] or [2TOUCH].
4
Press the MENU/OK button, or
# button and press the MENU/
OK button.
Sending Images in Shooting Mode
(QUICK SEND MODE)
Setting Up Quick Review Send (QUICK SEND MODE)
Available Settings
OFF *Default setting Images are not sent in shooting mode.
1TOUCH If images have previously been sent, you can automatically send an
image to the same destination device by pressing the MENU/OK
button after shooting while the image is displayed (GP.116).
You cannot use Quick Review Send when connecting to a
Bluetooth
®
-
enabled device for the first time, using a serial connection, or using a
wireless LAN connection (only for Caplio 500SE-W).
2TOUCH If images have previously been sent, you can automatically send an
image to the same destination device by pressing the MENU/OK
button after shooting during quick review display (GP.46).
When connecting to a Bluetooth
®
device for the first time, the image is
sent after discovering the destination device.