Filter
Top Products
174
8
Using the Bluetooth
®
Function
7
Press the MENU/OK button.
• Transfer of the images to the destination device begins and the
progress is displayed. Pressing the DISP. button cancels the
operation. Pressing the 6 (Playback) button or shutter release button
or turning the mode dial also cancels the operation.
• If a passkey is required to connect to the destination device, a
message appears prompting you to enter the passkey. (GP.162)
• If an error message appears during transfer, follow the message
instructions and send the images again. For details about the error
messages, see P.222.
• Once the transfer is completed, the
camera returns to shooting mode and
remains connected to the destination
device. You can change to playback
mode or voice memo mode or remain
connected to the destination device
until the camera is turned off. The
Bluetooth
®
antenna icon appears on
the LCD monitor while the camera is
connected.
Note ----------------------------------------------------------------------------------------------
• If an image is sent to a Bluetooth
®
-enabled device using [PRINT] (GP.157) or
[FILE SEND] (GP.166) in playback mode before Quick Review Send, destination
devices are not searched for again even if the camera is turned off and then on again.
Transfer of images to the previous destination device begins. When the transfer is
completed, the camera returns to shooting mode and remains connected to the
destination device.
• Once Quick Review Send is performed to a Bluetooth
®
-enabled device in shooting
mode and, thereafter, the camera is connected to a destination device, the camera
does not search for destination devices again. Transfer of images to the previous
destination device begins. When the transfer is completed, the camera returns to
shooting mode and remains connected to the destination device.
• During manual focus (GP.65), you cannot use Quick Review Send to send still
images to a device even when [QUICK SEND MODE] is set to [2TOUCH].
• The size of the images to be sent can be set beforehand. (GP.178)
To disconnect after Quick Review Send --------------------------------------------
Once Quick Review Send is completed, the camera returns to shooting mode and
remains connected to the destination device. To disconnect, switch to playback mode or
voice memo mode, or turn the camera off.