Filter
Top Products
212
10
Using the Wireless LAN Function (Only for Caplio 500SE-W)
1
Check that the destination device (computer) is turned
on.
2
Press the 6 (Playback) button.
• Check that [CHANGE COM] is set to [W-LAN] on the Expanded
Settings menu. (GP.193)
3
Press the 9 (Thumbnail Display) button twice.
• The screen is divided into 12 frames and thumbnails are displayed.
4
Press the MENU/OK button.
• The Playback Setting menu appears.
5
Press the " button to select
[FILE SEND], and then press
the $ button.
• If [SEND CONDITION] is set to [ON],
the [SEND TO] screen appears.
• If [SEND CONDITION] is set to [OFF]
(GP.219), go to Step 7.
• If the communication list has not been
transferred, or if [SEND CONDITION]
is set to [OFF] (GP.219) and the destination setting is incorrect, an
error message appears and the display returns to the Playback Setting
menu.
• If the camera is connected using a serial connection, a screen appears
confirming whether to disconnect the serial connection. Select [YES]
and press the MENU/OK button.
6
Press the !" buttons to select
the desired destination device
and then press the MENU/OK
button.
Sending Several Files