Filter
Top Products
159
8
Using the Bluetooth
®
Function
8
Press the !" button and
[SEND ONE] to send one image
or [SEND ALL] to send all
images, and then press the
MENU/OK button.
• Transfer of the images to the
destination device begins and the
progress is displayed. Pressing the
DISP. button cancels the operation. Pressing the 6 (Playback) button
or shutter release button also cancels the operation.
• If a passkey is required to connect to the destination device, a
message appears prompting you to enter the passkey. (GP.162)
• If an error message appears during transfer, follow the message
instructions and send the images again. For details about the error
messages, see P.222.
• Once the transfer is completed, the printer begins printing the images.
9
Press the MENU/OK button.
• The display returns to the playback screen.
Note ----------------------------------------------------------------------------------------------
The most recently connected destination device appears at the top of the list of
destination devices.
1
Check that the destination device (printer) is ready for
printing.
2
Press the 6 (Playback) button.
• For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the
Expanded Settings menu. (GP.193)
3
Press the 9 (Thumbnail Display) button twice.
• The screen is divided into 12 frames and thumbnails of the still images
are displayed.
4
Press the MENU/OK button.
• The Playback Setting menu appears.
Printing Several Still Images