Filter
Top Products
214
10
Using the Wireless LAN Function (Only for Caplio 500SE-W)
Immediately after you shoot an image, you can send the image file
to another device. This is convenient if you want to send images to
a predetermined device.
You need to set [QUICK SEND MODE] on the Expanded Settings
menu beforehand.
Caution------------------------------------------------------------------------------------------
Before sending files, create a communication list on the computer and transfer it to the
camera. (GP.202)
Note ----------------------------------------------------------------------------------------------
For information about setting your computer to receive images, see the documentation
that came with the computer.
Sending Files in Shooting Mode
(Quick Review Send)
Setting Up Quick Review Send
(QUICK SEND MODE)
Available Settings
OFF *Default setting Files are not sent in shooting mode.
1TOUCH Files are sent by pressing the MENU/OK button after shooting
while the file is displayed (GP.116).
You can use this function to send only still images (.JPG). If there
are still images with sounds (.JPG and .WAV), only still images
(.JPG) are sent.
You must use the Expanded Settings menu to specify the
destination beforehand. (GP.220)
2TOUCH Files are sent by pressing the MENU/OK button after shooting
during quick review display (GP.46). You can use this function
to send still images (.JPG), text (.TIF), and still images with
sound (.JPG and .WAV).
When sending files, you can use the [SEND TO] screen
displayed at the time of sending the files to specify the
destination, or you can also use the Expanded Settings menu to
specify the destination beforehand. (GP.219)