Filter
Top Products
128
The Network Menu (G800SE Only)
12
Network Menu Options
Synchronize Clock
If the camera is connected to an SR-10 server, the camera clock can be set using
data downloaded from the SR-10 server. Launch SR-10 before using this option.
Option Description
Off Do not synchronize the camera clock.
Auto The clock is synchronized automatically when the camera is turned on.
Manual
Press $ to synchronize the clock.
Note ----------------------------------------------------------------------------------
• If [Auto] is selected, the clock will be synchronized no more than once per day,
at the first time that day that the camera is connected to the SR-10 server.
• The clock will not be synchronized if [Manual] is selected without first launching
SR-10.
Update Firmware
Download new firmware from the SR-10 server, if available. Launch SR-10 before
using this option.
Option Description
Off Do not perform the update.
Auto Before the camera powers down, it will check the SR-10 server for a
firmware update. If new firmware is available, a confirmation dialog will be
displayed; highlight [Yes] and press MENU/OK to perform the update.
Manual
When you press $, the camera will check the SR-10 server for a firmware
update. If new firmware is available, a confirmation dialog will be displayed;
highlight [Yes] and press MENU/OK to perform the update.
Note ----------------------------------------------------------------------------------
If [Auto] is selected, the camera will check for updates no more than once per
day, at the first time that day that the camera turned off while connected to
the SR-10 server.