Filter
Top Products
151
Wireless Networks (G800SE Only)
14
2
Choose a destination.
• Navigate to the desired folder on the computer hard drive and
enter a file name (note that although you can use any name, you
will need to rename the file “SYSTEM.PRM” when copying it to the
memory card in Step 5). Click [Save]. You will be prompted to enter a
password.
3
Enter a password and click [OK].
• The communication list will be saved to the selected destination and
a message will be displayed.
Note -------------------------------------------------------------------------------------
Communication lists stored on the computer hard drive can be opened for
editing using the ST-10 [Open file] option. Enter the password you used in Step 3
when prompted. A warning will be displayed if the password is incorrect.
4
Exit ST-10.
• Click [OK] in the ST-10 window to exit ST-10.
5
Copy the communication list to the
memory card.
• Insert the memory card in a card reader
or card slot and copy the communication
list to the “SYSTEM” folder on the
memory card. Rename the file “SYSTEM.
PRM”.
6
Insert the memory card in the camera.
7
Select [Import Communication Setting].
• After turning the camera on, select [Import Communication Setting]
in the expanded settings menu as described in Step 9 on P.149.
Caution ---------------------------------------------------------------------------------
Only one communication list at a time can be read from a memory card.
Note -------------------------------------------------------------------------------------
The communication list can also be transferred to the camera by direct USB
connection (GP.148).