Filter
Top Products
69
Using Custom Help (G800SE Only)
6
6 Using Custom Help (G800SE Only)
Pressing DISP. when [On] is selected for [Custom Help] (GP.125) in the
expanded settings menu (GP.118) displays previously-selected JPEG
images (“custom help”). Custom help is available in the shooting
(GP.84) and playback (GP.72) menus.
Creating Custom Help
The JPEG images must first be copied to a memory card and then
copied from the card to the camera’s internal memory.
1
Ready a memory card.
• Connect the camera or a memory card reader to the computer and
insert a memory card that has been formatted in the camera.
2
Copy the images to the [IMPORT] folder.
• Copy the JPEG images to the [IMPORT] folder on the memory card.
Be sure that the folder contains no more than 99 images.
3
Disconnect the camera or card reader.
• If you are using a card reader, remove the memory card and insert
the card in the camera (GP.29).
4
Select [Admin Mode [Regist]].
• Select [Custom Help] in the expanded
settings menu (G P.118). Highlight [On]
and press $ and then highlight [Admin
Mode [Regist]] and press $. You will be
prompted to enter a password.
5
Enter a password.
• Enter the password created using the [Custom Help]> [Admin Pass
Key] option (GP.125) in the expanded settings menu (GP.118; the
default password is “0000”) and press ADJ./MEMO (for information
on entering a password, see P.108). A confirmation dialog will be
displayed if the password is correct; entering an incorrect password
returns you to the expanded settings menu.