Filter
Top Products
97
Setup Menu
9
File Name
Select [Custom] to choose the four-letter prefix for the image file names assigned
automatically by the camera.
Caution ------------------------------------------------------------------------------
• If the first four letters of the file name have been changed by the user, the
[File Sequence No.] item (G P.100) in the setup menu (G P.95) functions as
described below.
Option Description
On (Continue
numbering)
The four-letter prefix chosen by the user is followed by a
four-digit file number assigned in ascending order by the
camera, which in turn is followed by the extension “.jpg”. When
the file number reaches 9999, a new folder is created and file
numbering starts over from 0001; inserting a new memory
card does not reset file numbering.
Off (Do not
continue
numbering)
When a new memory card is inserted, files are named using
the four-letter prefix followed by a four-digit file number
assigned in ascending order by the camera. No further pictures
can be taken once the file number reaches 9999.
• When files are copied to a computer using DL-10 (G P.179), the files saved to
the computer are automatically renamed using “RIMG” in place of the selected
prefix.
• Prefixes may consist of capital letters, numbers, and underscores (lower case
can not be selected by pressing D) and must contain exactly four characters.
Pressing ADJ./MEMO has no effect when fewer than four characters are
entered. The last prefix entered is displayed in the name area; to delete the
character at the current cursor position, select [Delete].
LCD Brightness
Press the !" buttons to adjust the brightness of the picture display.
Reg. My Settings
GP.106
Save current camera settings.
Stepped Zoom
Select [On] to allow zoom to be adjusted in discrete steps that on a 35-mm
camera would be equivalent to focal lengths of 28 mm, 35 mm, 50 mm, 85 mm,
105 mm and 140 mm. In macro mode, the stepped zoom focal lengths are roughly
equivalent to 33, 35, 50, 85, 105 and 140 mm on a 35-mm camera.