Filter
Top Products
131
Bluetooth® (G800SE Only)
13
Entering a Password
If an authentication key, or password, is
required for connection to a Bluetooth®
device, a message will be displayed. Enter a
password as described below.
1
Press MENU/OK.
• An on-screen keyboard will be displayed.
2
Enter the password.
• Enter a password as described on P.108 (for
information on selecting a password,
consult the documentation provided
with the host device). If you do not
enter the correct password within
30 seconds, an error message will be
displayed; press MENU/OK to try again.
3
Press MENU/OK.
• Press MENU/OK to begin transfer.
Note -------------------------------------------------------------------------------------
• The camera supports passwords of up to 16 characters.
• The camera stores the password and performs authentication automatically
when you next connect to the device; no further password entry is required.
If desired, the password can be stored in the camera before the connection is
made (GP.123).
• If the Bluetooth® device displays a password-entry dialog before the camera,
enter the password on the device first and then enter the same password on
the camera.