Filter
Top Products
107
PRINTING PHOTOGRAPHS
3
Connect the camera.
Open the terminal cover and
plug the cable into the USB
cable connector.
Press the ADJ. lever in. The
camera will turn on and the
message shown at right will
be displayed; press the ADJ. le-
ver in again immediately.
Note
If you do not press the ADJ. lever in while the above message
is displayed, it may in some cases be replaced after two sec-
onds by a message stating that the camera is connecting to
a computer. Turn the camera off and press the ADJ. lever in
again.
The message will be replaced by the PictBridge play-
back display shown at right (if the PictBridge play-
back display does not appear, the camera is still es-
tablishing a connection to the printer).
Caution
Do not use force when connecting the USB cable or when han-
dling the camera with the cable connected.