Filter
Top Products
FIRST-TIME USER? READ THIS.
20
Tip: Avoiding Blurred Pictures
To prevent blurring caused by the camera moving when the shut-
ter is released (“camera shake”), press the shutter-release button
smoothly and gently. Blurring is particularly likely to occur if:
• The flash is off and lighting is poor, or
• The camera is zoomed in (page 22)
In situations in which photographs are especially prone to blur-
ring caused by camera shake, a J icon will be displayed in the
picture display. Hold the camera steady and try focusing again, or
attempt one of the following remedies:
• Turning the flash on ( ) or using auto flash ( ; see page 24)
• Choosing a higher ISO (page 84)
• Using the self-timer (page 26)
Notes
• If the flash will fire when the picture is taken, a pre-flash will be
emitted to assist focus and exposure.
• You can choose how long pictures are displayed in the picture
display after shooting. If desired, photographs can be displayed
until the shutter-release button is pressed halfway (page 126).
• In
5 mode, a built-in neutral density (ND) filter is used for be-
tween f/8.0 and f/11. The smallest aperture available in
5 mode
is f/11.