Filter
Top Products
Quick Reference
105
Hooks for a shoulder belt
Attach a shoulder belt (optional).
Remote sensor/Infrared port
Point the Remote Commander (108)
towards the remote sensor to operate
your camcorder.
Active Interface Shoe
e Active Interface Shoe supplies
power to optional accessories such as
a video light, a ash, or a microphone.
e accessory can be turned on or o
as you operate the POWER switch on
your camcorder. Refer to the operating
instructions supplied with your
accessory for details.
e Active Interface Shoe has a safety
device for xing the installed accessory
securely. To connect an accessory,
press down and push it to the end, and
then tighten the screw. To remove an
accessory, loosen the screw, and then
press down and pull the accessory out.
When you open or close the shoe cover,
slide it as indicated by the arrow.
When you are recording movies with an
external ash (optional) connected to the
accessory shoe, turn o the power of the
external ash to prevent charging noise
being recorded.
You cannot use an external ash (optional)
and the built-in ash at the same time.
When an external microphone (optional)
is connected, it takes precedence over the
built-in microphone.
Built-in microphone (27)
An Active Interface Shoe compatible
microphone (optional) will take
precedence when connected.
Camera recording lamp (75)
Lights up in red during recording.
Flashes when remaining “Memory Stick
PRO Duo” space or battery power is
low.