Filter
Top Products
88
Horizontal stripes appear on the
image.
is occurs when recording images under a
uorescent lamp, sodium lamp, or mercury
lamp. is is not a malfunction.
[SUPER NIGHTSHOT] cannot be
operated.
Set the NIGHTSHOT switch to ON.
[COLOR SLOW SHTR] does not operate
correctly.
[COLOR SLOW SHTR] may not operate
correctly in total darkness. Use NightShot
or [SUPER NIGHTSHOT].
You cannot adjust [LCD BL LEVEL].
You cannot adjust [LCD BL LEVEL] when:
e LCD panel is closed on your
camcorder with the LCD screen facing
out.
e power is supplied from the AC
Adaptor.
Playing back
Movies cannot be played back.
Touch (HOME) (MANAGE
MEDIA) [
/ SET] to select the
image quality of the movie you want to
play back (p.
56).
Still images cannot be played back.
Still images cannot be played back if you
have modied les or folders, or have
edited the data on a computer. (e le
name ashes in that case.) is is not a
malfunction (p.
98).
Still images recorded on other devices
may not be played back. is is not a
malfunction (p.
98).
“ ” is indicated on a still image in the
[VISUAL INDEX] screen.
is may appear on still images recorded
on other devices, edited on a computer, etc.
You removed the AC Adaptor or the
battery pack before the access lamp
was turned o aer recording. is
may damage your image data and
is
displayed.
“ ” is indicated on an image in the
[VISUAL INDEX] screen.
Perform [REPAIR IMG.DB F.] (p. 58). If it
still appears, delete the image marked with
(p. 45).
No sound or only a quiet sound is heard
during playback.
Turn up the volume (p. 24, 32).
Sound is not output when the LCD panel is
closed. Open the LCD panel.
When you record sound with [MICREF
LEVEL] (p.
82) set to [LOW], the recorded
sound may be dicult to hear.
Sounds cannot be recorded while shooting
a 3-second movie (approx.) using [SMTH
SLW REC].
Left and right sound will be heard
unbalanced when playing back on
computers or other devices.
is happens when sound recorded in
5.1ch surround is converted to 2ch (normal
stereo sound) by a computer or other
device (p.
27). is is not a malfunction.
Change the sound conversion type
(downmix type) when playing back on
2ch stereo devices. Refer to the instruction
manual supplied with your playback device
for details.
Change the sound to 2ch when creating a
disc using the supplied soware “PMB.”
Record sound with [AUDIO MODE] set to
[2ch STEREO] (p.
62).