Filter
Top Products
Getting Started
15
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 98) after
attaching it to your camcorder.
Notes
You cannot attach any “InfoLITHIUM” battery
pack other than the H series to your camcorder.
1 Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the mark on the DC plug
is facing up.
2 Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
3 Slide the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
4 Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
5 Insert the camcorder into the
Handycam Station securely, all the
way to the bottom.
e
/CHG (charge) lamp lights up and
charging starts.
When the /CHG (charge) lamp turns
o, the battery pack is fully charged.
Notes
When inserting the camcorder into the
Handycam Station, close the DC IN jack cover.
Battery pack
DC IN jack
DC plug
AC Adaptor
Power cord (Mains lead)
To the wall outlet
(wall socket)
/CHG (charge)
lamp
POWER switch