Filter
Top Products
Getting Started
19
3 Select the desired geographical
area with / , then touch [NEXT].
4 Set [SUMMERTIME], then touch
[NEXT].
5 Set [Y] (year) with / .
6 Select [M] with / , then set
the month with / .
7 Set [D] (day), hour and minute in the
same way, then touch [NEXT].
8 Make sure that the clock is correctly
set, then touch .
e clock starts.
You can set any year up to the year
2037.
To turn o the power
Slide the POWER switch to OFF (CHG).
Notes
If you do not use your camcorder for about
3 months, the built-in rechargeable battery
gets discharged and the date and time settings
may be cleared from the memory. In that case,
charge the built-in rechargeable battery and
then set the date and time again (p.
101).
It takes a few seconds for your camcorder to
be ready to shoot aer the power is turned on.
You cannot operate your camcorder during this
time.
e lens cover opens automatically when the
power is turned on. It closes when the playback
screen is selected, or the power is turned o.
In the setting at the time of purchase, the
power turns o automatically if you leave your
camcorder without any operation attempted for
approximately 5 minutes, to save battery power
([A.SHUT OFF], p.
75).
Tips
e date and time does not appear during
recording, but they are automatically recorded
on the “Memory Stick PRO Duo,” and can be
displayed during playback ([DATA CODE],
p.
70).
Refer to page 95 for information concerning
“World time dierence.”
If the buttons on the touch panel do not
work correctly, adjust the touch panel
(CALIBRATION) (p.
101).
Changing the language setting
You can change the on-screen displays to
show messages in a specied language.
To select the screen language, touch
(HOME) (SETTINGS) [CLOCK/
LANG] [ LANGUAGE SET]
(p. 74).