Open as PDF
Do not use [SUPER NIGHTSHOT] in bright
places. is may cause a malfunction.
Do not cover the infrared port with your ngers
or other objects (p. 28).
Remove the conversion lens (optional).
Adjust the focus manually ([FOCUS], p. 79)
when it is hard to focus automatically.
e shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
You can record a transition with the
following eects adding to the interval
Select the desired eect in [STBY] (to fade in)
or [REC] (to fade out) mode, then touch
e fader indicator stops ashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step .
If you press START/STOP, the setting is
D.EFFECT (Digital eect)
When you select [OLD MOVIE],
appears and you can add an old movie
eect to images.
To cancel [D.EFFECT], touch [OFF].
PICT.EFFECT (Picture eect)
You can add special eects to an image
during recording. appears.
Does not use [PICT.EFFECT] function.
Images appear in sepia.
B&W (Black and white)
Images appear in black and white.
Images appear as a pale pastel drawing.
BLT-IN ZOOM MIC (Built-in
When you set [BLT-IN ZOOM MIC] to
[ON] ( ), you can record a movie with
directional sound as you move the power
zoom lever or press the zoom buttons
on the LCD frame (e default setting is
MICREF LEVEL (Microphone
You can select the microphone level for
Select [LOW] when you want to record an
exciting and powerful sound in a concert
Records various surround sounds,
converting them into the appropriate level.
LOW ( )
Records surround sound faithfully.
is setting is not suitable for recording
Fading out Fading in