Filter
Top Products
Scheduling
VEMS Portal Server User Guide 43
4. When done click Finish, verify the information, and click Create Schedule to add the new
schedule to the calendar.
Record by Manual Entry
When the Record Source is Manual Entry, you can only Record To an NVR.
T To use Manual Entry as the record source:
1. Select a live stream from the list of
Program Names.
2. Go to
Advanced Settings and select Manual Entry.
3. Select and define
MPEG-1, MPEG-2, MPEG-4, WM, or H.264 as the record source and click
Next.
MPEG-1 Enter a Program Name, or IP Address and Port number.
MPEG-2 Enter a Program Name, or IP Address and Port number.
MPEG-4 Enter a Program Name or URL. If URL, use
VBHTTP or RTSP in
following format:
vbhttp://MPEG4Unit1/vbs1d1.sdp
rtsp://172.2.3.4/vbrickvideo1
WM Enter a Program Name or URL.
H.264 Enter a Program Name or URL.