Filter
Top Products
Security Escort | Technical Reference Manual | 3.0 System Menus
and Screens
EN | 29
Bosch Security Systems | 6/12 | 38947D
No Point Text If Area Text
This checkbox affects the location text
shown on the Alarm Screen. If this
checkbox is checked and the alarm is
determined to be within a predefined
area, only the area text is displayed
(any receiver location text is
suppressed). Typically, this checkbox
should be checked.
Output includes Subscriber ID
If this checkbox is checked, any time
the system prints or displays text for
an alarm or test the subscriber’s ID
number is displayed. Otherwise, the
subscriber’s ID is not shown.
Output includes Transmitter ID
If this checkbox is checked, any time
the system prints or displays text for
an alarm or test the transmitter ID
number is displayed. Otherwise, the
transmitter ID is not shown. Typically,
this checkbox would not be checked.
Limit Alarms to 1 Transponder
This box should not be checked. It is
used only in a system where all
transponders operate on areas separate
from each other. It prevents all
interactions between receivers on
different transponders. Typically this
is undesirable and there is now a
selection on an individual transponder
basis to accomplish this feature.
Option 2
This checkbox is for a future option
and at this time it has no function.
Leave this checkbox unchecked.
Require Alarm Report
If this checkbox is checked, the
operator is prompted to complete an
Alarm Report when the alarm is reset
from the screen. If the responding
officer is required to complete the
report or if no system report is
desired, this box should not be
checked. If the operator should
complete the report, check this box.
Security Alarms Silent
If this checkbox is checked, alarms
transmitted by Security or Watchman
Transmitters are to be silent. This
alerts the operator at the central
console, but does not sound the sirens
of the alert units or the horns in the
receivers.
Installer Alarms Silent
If this checkbox is checked, alarms
transmitted by transmitters issued to
installation company representatives
and visitors are to be silent. The
operator at the central console is
alerted, but the sirens of the alert
units or the horns in the receivers are
not sounded. Typically, this checkbox
is checked.
Alarm Voice Output
If this checkbox is checked, predefined
sound (.WAV) files can be played at the
alarm console for specific alarm types.
Typically, this checkbox is not
checked.
Show Personal Data
If this checkbox is checked, personal
height, build, hair, and eye color data
displays on the alarm screen.
No Receiver Icons
If this checkbox is checked, individual
receiver icons are not shown on the
alarm map display. Typically, this
checkbox is checked.
Show Tests On The Map
If this checkbox is checked, tests from
Subscriber’s Transmitter appear on the
normal map screen as OK or FAIL icons.
This signifies a successful test by a
valid subscriber or an attempted test
transmission from a transmitter not in
the Subscriber Database. This option
does not affect the display the
subscriber receives from a receiver or
alert unit’s strobe. Typically, this
checkbox is checked.
All Pager Confm Not Reqd
If checked, the confirmation pager
message is not sent to any of the pager
if the alarm is acknowledged by an
acknowledgement transmitter.
Option 4
This checkbox is for a future option
and at this time has no function. Leave
this checkbox unchecked.
Option 5
This checkbox is for a future option
and at this time has no function. Leave
this checkbox unchecked.