Filter
Top Products
Security Escort | Technical Reference Manual | 3.0 System Menus
and Screens
EN | 68
Bosch Security Systems | 6/12 | 38947D
Transmit Buffer Max
This value is the maximum number of
bytes that were processed by the
system, but not yet transmitted on this
socket. If displayed in yellow, more
than 50% of the queue was in use.
Reset Status
Pressing this button resets all values
shown in this screen.
Refresh Data
Pressing this button refreshes all
values shown in this screen. The values
are not automatically updated when the
screen is left open.
3.5.3 Winsock Data Screen
This screen shows information about the
Windows Winsock support. This is only
used for diagnostic purposes.
Figure 688: Winsock Data Screen
3.5.4 This Computer's Name and Address
Screen
This screen show the computer’s network
name and current IP address.
Figure 699: This Computer's Name and
IP Address Screen
3.6 About Menu
Figure 700: About Menu
Demo Manual Alarm, Subscriber 1
For demonstration only, it cannot be
used in a live system. Causes the
system to display an alarm from the
subscriber with transmitter ID number
one. In the System Preferences Screen,
check Enable Demo Selections to enable
these demo alarm and trouble
selections. The transponder
communication ports and network
communication ports must also be
disabled and the operator of the system
must login at Installer or Installer
Master authority level.
Demo Lanyard Alarm, Subscriber 2
For demonstration only, it cannot be
used in a live system. Causes the
system to display a lanyard alarm from
the subscriber with transmitter ID
number two.