Filter
Top Products
Security Escort | Technical Reference Manual | 3.0 System Menus
and Screens
EN | 67
Bosch Security Systems | 6/12 | 38947D
Note:
With version 2.04 of the software it
is possible to use UNC path names
rather than mapping drive letters.
Therefore, the path to the master
computer’s database is
\\SLAVE\C\ESCORT.
Local Escort Path: The path on this
workstation the Security Escort was
installed in. Typically, it is
C:\ESCORT.
Backup/Restore to Disk Cartridge Path
When backing up or restoring the
databases to a disk cartridge use this
path.
Subscriber Image File Path
The Security Escort System software can
display an image for each subscriber on
the alarm screen. This parameter tells
the software the path to where the
image files are stored. The default is
C:\ESCORT\IMAGES.
Subscriber Image Extension
The subscriber images can be in JPEG or
Windows Bitmap format. All images in a
system must be in the same format. For
the JPEG format, enter the Windows
extension JPG. For the Bitmap format,
enter the Windows extension BMP.
Subscriber Image Scaling %
When the display is set to 640 by 480
pixels and subscriber images are being
displayed, this parameter controls the
image size. This value can range from
10% to 100% and should be adjusted
while viewing alarms to get the desired
image size. When the display is set to
800 by 600 or larger (recommended),
this parameter has no effect.
3.5.2 Network Socket Status Screen
This screen shows diagnostic
information for the selected TCP/IP
socket.
Figure 677: Current Network Socket
Status Screen
Successful Incoming Messages
This value is the number of messages
the system successfully received on
this socket.
Incoming Communication Errors
This value is the number of messages
the system detected errors in, on this
socket. If displayed in yellow, this
value is more than 1.5% of the
Successful Incoming Messages.
Incoming Retried Messages
This value is the number of successful
receptions that indicated that the
sending application retried. If
displayed in yellow, this value is more
than 1.5% of the Successful Incoming
Messages.
Total Outgoing Messages
This value is the total number of
outgoing messages that were sent on
this socket.
Outgoing Retried Messages
This value is number of outgoing
messages that must be retried because
the receiving application did not
acknowledge them. If displayed in
yellow, this value is more than 1.5% of
the Total Outgoing Messages.
Receive Buffer Max
This value is the maximum number of
bytes that were received on this serial
port, but not yet processed by the
system. If displayed in yellow, more
than 50% of the queue was in use.