Filter
Top Products
Security Escort | Technical Reference Manual | 3.0 System Menus
and Screens
EN | 34
Bosch Security Systems | 6/12 | 38947D
Ellipsis (…)
Clicking this button displays a
calendar where you can graphically
select a date.
Remove >>
Clicking this button removes the
selected date from the holiday dates
list.
<< Add
Clicking this button adds the date
shown to the holiday dates list.
3.2.9 Edit Schedule Times Screen
This screen allows the arming and
disarming times to be programmed for
each of the days of the week. All times
are expressed in 24-hr. time (00:00 to
23:59). Each schedule has one arm time
and one disarm time for each of the
seven days of the week.
If both the arm time and disarm time
are programmed to 00:00, the schedule
is active (armed) for the entire day.
If the arm time is 00:00 and the disarm
time is programmed, from midnight to
the programmed disarm time, the
schedule is active (armed) and from the
disarm time to the end of the day the
schedule is off (disarmed).
If the disarm time is 00:00 and the arm
time is programmed, from midnight to
the programmed arm time the schedule is
off (disarmed) and from the arm time to
the end of the day the schedule is
active (armed).
Figure 333: Edit Schedule Time Screen
If both the disarm time and the arm
time are programmed and the disarm time
occurs before the arm time (normal –
eight-to-five day), from midnight to
the programmed disarm time the schedule
is active (armed). From the disarm time
to the arm time, the schedule is off
(disarmed). From the arm time to the
end of the day, the schedule is active
(armed).
If both the disarm time and the arm
time are programmed and the arm time
occurs before the disarm time, from
midnight to the programmed arm time the
schedule is off (disarmed). From the
arm time to the disarm time, the
schedule is active (armed). From the
disarm time to the end of the day, the
schedule is off (disarmed).
Arm Time
This is the time the schedule becomes
active (on or armed) for the selected
day of the week. Times are expressed in
24-hr. time (00:00 to 23:59).
Disarm Time
This is the time the schedule goes off
(disarmed) for the selected day of the
week. Times are expressed in 24-hr.
time (00:00 to 23:59).
Day of the Week
Select the day you want to change the
time. The arm time and disarm time are
programmed separately for each day of
the week. You must individually select
each day of the week and set the
desired times.
3.2.10 View Alarm Groups Screen
Figure 34 shows the alarm groups
assigned to the selected schedule and
their current arming state. The on and
off states indicate the alarm group is
under manual control. Auto is under
control of the selected schedule. The
alarm group is armed if the schedule is
active.
Figure 344: View Alarm Groups Screen