Filter
Top Products
Security Escort | Technical Reference Manual | 3.0 System Menus
and Screens
EN | 49
Bosch Security Systems | 6/12 | 38947D
RAM Point Info
Views the RAM image of point
information.
RAM Point Stat
Views the RAM image of point status.
RAM Point Trouble
Views the RAM image of point trouble.
RAM EE Mstat Batt
Views the RAM and EEPROM images of
transponder status and battery
condition.
RAM EE Buss Fault
Views the RAM and EEPROM images of
transponder MUX bus fault condition.
RAM Counters
Views the RAM image of the process
registers.
Save EE
Saves the current RAM image to the
EEPROM memory on the transponder.
EE Point Info
Views the EEPROM image of point
information.
EE Point Stat
Views the EEPROM image of point status.
EE Point Trouble
Views the EEPROM image of point
trouble.
Bus Micro Revision
Views the bus micro revision for the
connected points.
Last MUX Message
Views the last MUX bus message
received.
EE counters
Views the EEPROM image of the process
registers.
Clear EE
Clears the EEPROM memory on the
transponder and resets the transponder.
Previous
Returns to the previous transponder in
the system.
Next
Advances to the next transponder in the
system.
3.3.13 Receiver Configuration Screen
Once the receiver and alert unit data
for a transponder is entered into the
Transponder Database, this screen is
used to verify that each receiver is
working and is properly addressed in
the database. This setup tool
identifies errors in the address switch
settings of receivers and alert units,
as well as data entry errors in the
Transponder Database.
Figure 466: Receiver Configuration
Screen
Put This Receiver In Setup Mode
This button initiates the setup process
by causing both the red and green LED’s
of the selected receiver illuminate.
The red and green LED flash. On the
central console, the screen changes
presenting an abort setup for this MUX
Point button. This screen allows
proceeding to the next device in the
event that one receiver is not set up
properly.
The next step is using a Maintenance
Transmitter to transmit an alarm while
standing near the receiver.
Note