Filter
Top Products
Security Escort | Technical Reference Manual | 3.0 System Menus
and Screens
EN | 65
Bosch Security Systems | 6/12 | 38947D
This is the standard Windows Common
Open File Screen that is used for
selecting the file to be printed. It
works the same as any other Window’s
standard application.
Figure 644: Common Open File Screen
3.5 Network Menu
This is the network menu used to set up
and monitor the TCP/IP network and the
computer’s file paths.
Figure 655: Network Menu
3.5.1 System Directories and Network
Address Screen
Use this screen to set up the Network
IP addresses and ports and related
options. File paths can also be set up.
Figure 666: System Directories and
Network Address Screen
Databases are not shared: If not
checked, the master and all the slave
and workstation computers share the
same database files. This box must only
be checked if each computer has its own
copy of the databases stored locally.
In normal operation, this box is
typically unchecked. If this box is
checked, the databases must be manually
updated using backup and restore every
time changes are made to the database.
Show connection pop-ups: If checked,
shows a pop-up message box whenever a
network connection is initiated or
released with another computer.
Unchecking this box stops the message
boxes from displaying. In normal
operation, this box is typically
unchecked.
Show all error pop-ups: If checked,
shows a pop-up message box whenever a
network error is reported. Unchecking
this box stops the message boxes from
displaying. In normal operation, this
box is typically unchecked.
Disable auto reconnect: If checked,
the system does not automatically
attempt to reconnect a lost connection
each minute. Unchecking this box allows
the system to automatically reconnect a
lost connection. In normal operation,
this box should be unchecked.
Auto synchronize time: If checked, the
master computer automatically
synchronizes the time on the slave and
workstation computers once each night.