Filter
Top Products
Security Escort | Technical Reference Manual | 6.0 Security Escort
Pager Setup
EN | 75
Bosch Security Systems | 6/12 | 38947D
If the pager information is entered,
this individual may be assigned to
three paging groups. Each group accepts
eight members maximum. Remember, it
takes time to communicate with a paging
service; therefore, only add members to
a group if they need to be there.
Otherwise, you may slow the paging
report to people that must respond.
A pager group may contain
members accessed by the local
paging system and members that
require dial-up access. Dial-up
access typically takes much
longer and it may slow pages to
the local paging system.
6.5 Alarm Area Setup
In the Transponder Database under the
File Menu, select the transponder with
the desired programmed alarm area. Then
click Edit data. Click Show areas and
select the area desired.
The pager group field may be programmed
with a pager group that is paged if
this area is the most likely location
of an alarm. This pager group is the
first group paged to allow quick
response by those individuals charged
with responding to an alarm in this
area. Each area may be assigned a pager
group that can be the same or different
from other alarm areas.
Figure 755: Transponder Area Edit
Screen
The default alarm pager group defined
in the Pager Setup Screen is paged
after the pager group assigned to an
area. If a pager group is not assigned
to an area or the alarm location is not
within a defined area, only the default
pager group is paged.
6.6 Manual Pages
Select the Send Pager Message Screen
under the Setup Menu to send manual
pages.
Type the desired message in the large
text box on the top.
To send the page to all members of
the default service pager group,
click Send Service.
To send the page to all members of
the default security pager group,
click Send Security.
To send the page to all members of a
specific pager group, enter the
desired group number in the pager
group field and click Send to group.
To send the page to an individual,
click the down arrow to display a
list of the individuals that are
programmed in this system. Select
the desired individual by clicking
on their name with the left mouse
button, then click Send to
individual.
Figure 766: Send a Pager Text Message
Screen