Bosch Appliances VOT-320 Security Camera User Manual


 
VOT-320 Installation | en 21
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09
SD slot
You can insert an SD card into the slot on the side of the camera module to enable recordings
to be saved locally. SD cards are the ideal solution for shorter storage times and temporary
recordings, for example alarm recordings or local buffering in the event of network
interruptions.
Playing back recordings is also possible using a different VOT-320 camera.
1. Carefully slide the SD card into the slot as far as it will go, until it locks into place.
2. To remove the SD card, push carefully in the direction of insertion until the mechanical
catch releases and then remove the card.
4.4 Power on/power off
Power supply
The VOT-320 does not have a power switch. Power is supplied via a separate unit. Connect
the VOT-320 to the power supply unit and plug this into the mains. The camera is now ready
for use. The VOT-320 does not come supplied with a power supply unit.
1. Plug the terminal block with the PSU cable connected to it into the upper 2-pin socket on
the back of the camera module.
2. Connect the power supply unit to the mains. The VOT-320 is ready for use as soon as the
CONNECT LED changes from a red light, indicating the start-up procedure, to a green
light.
Provided the network connection has been correctly made, the green LINK LED also lights up.
The lit orange ACTIVITY LED signals that data packets are being transmitted via the network.
NOTICE!
The release letter for the current firmware version includes a list of compatible SD cards.
CAUTION!
If the card is formatted, all existing data is deleted from the card.
You should therefore check whether the SD card contains any data that needs to be backed
up before it is inserted.
CAUTION!
Use only SELV power supply units with UL approval.
Where necessary, use suitable equipment to ensure that the power supply is free from
interference such as voltage surges, spikes or voltage drops.
Do not connect the VOT-320 to the power supply until all other connections have been made.