Filter
Top Products
VOT-320 Configuration using a Web browser | en 25
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09
Establishing the connection
Before you can operate the VOT-320 within your network, it must have a valid IP address for
your network and a compatible subnet mask.
The following default address is preset at the factory: 192.168.0.1
1. Start the Web browser.
2. Enter the IP address of the VOT-320 as the URL.
3. During initial installation, confirm the security questions that appear. The connection is
established and after a short time you will see the LIVEPAGE with the video image.
Maximum number of connections
If you do not connect, the camera may have reached its maximum number of connections.
Depending on the unit and network configuration, each VOT-320 can have up to 25 Web
browser connections or up to 50 connections via Bosch Video Client or Bosch Video
Management System.