Filter
Top Products
VOT-320 Configuration using a Web browser | en 43
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09
5.18 Advanced Mode: Encoder Streams
The VOT-320 simultaneously generates two H.264 data streams (Dual Streaming); you can
select the relevant property for these here and connect them to an encoder profile, for
example one for transmissions to the Internet and one for LAN connections.
Two settings with different encoder properties are available:
– H.264 BP+ bit-rate-limited
Select this setting when using hardware decoders or the Divar XF digital video recorder.
The bit rate is limited to 1.2 Mbps.
CABAC: off
CAVLC: on
GOP structure: IP
I-frame distance: 15
Deblocking filter: on
– H.264 MP SD
Select this setting when using software decoders, PT and for rapid movements in the
images.
CABAC: on
CAVLC: off
GOP structure: IP
I-frame distance: 30
Deblocking filter: on
1. Select the required encoder properties and one of the encoder profiles for each data
stream.
2. Click the Preview button. The preview screens for both data streams are shown.
CAUTION!
Hardware decoders VIP XD and VIP X1600 XFMD can only process algorithm H.264 BP+. Bear
this in mind when configuring profile settings.