Filter
Top Products
VOT-320 Configuration using a Web browser | en 69
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09
5.34 Advanced Mode: Network
The settings on this page are used to integrate the VOT-320 into an existing network.
Some changes only take effect after the camera is rebooted. In this case, the Set button
changes to Set and Reboot.
1. Make the desired changes.
2. Click the Set and Reboot button. The VOT-320 is rebooted and the changed settings are
activated.