Filter
Top Products
94 en | Maintenance and upgrades VOT-320
DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
7.3 Fuse replacement
There is a spare fuse inside the housing.
1. Open the cover of the housing.
2. Open the F501 fuse holder (opening E on camera module) by means of a screwdriver
(see Section 3.4 Controls and displays on the camera module, page 15).
3. Replace the fuse with a 5 × 20 mm fuse that has the same current rating: medium, 250 V,
3.15 A. The following fuses may be used:
– Littelfuse 0218 3.15 MXP or
– COOPER Bussmann S506-3.15A-R
7.4 Repairs
Ensure that all maintenance or repair work is carried out only by qualified personnel
(electrical engineers or network technology specialists). In case of doubt, contact your
dealer's technical service center.
7.5 Transfer and disposal
The VOT-320 should only be passed on together with this installation and operating manual.
Your Bosch product is designed and manufactured with high-quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be
disposed of separately from your household waste.
In the European Union, there are separate collection systems for used electrical and
electronic products. Please dispose of this equipment at your local community waste
collection/recycling center.
7.6 Export limitations
The camera model VOT-320-V xxH with 30 ips frame rate is governed by the United States
Export Administration Regulations. When re-selling the VOT-320 the seller is responsible for
applying for the required licenses. He commits himself to compliance with applicable export
control regulations. The seller is specifically advised to check the applicability of the US re-
export control legislation.
CAUTION!
Disconnect the power supply from the mains before opening the housing of the camera.
CAUTION!
Never open the camera module of the VOT-320.
The camera module does not contain any user-serviceable parts.