Filter
Top Products
6 en | Preface VOT-320
DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
1Preface
1.1 About this manual
This manual is intended for persons responsible for the installation and operation of the
thermal IP camera VOT-320. International, national and any regional electrical engineering
regulations must be followed at all times. Relevant knowledge of network technology is
required. The manual describes the installation and operation of the camera.
1.2 Conventions in this manual
In this manual, the following symbols and notations are used to draw attention to special
situations:
1.3 Intended use
The thermal IP camera VOT-320 transfers video and control signals over data networks
(Ethernet LAN, Internet). There are various memory options for recording the captured
images. The camea is intended for use with CCTV systems. Various functions can be triggered
automatically by incorporating external alarm sensors. Other applications are not permitted.
In the event of questions concerning the use of the unit which are not answered in this
manual, please contact your sales partner or:
Bosch Sicherheitssysteme GmbH
Werner-von-Siemens-Ring 10
85630 Grasbrunn
Germany
www.boschsecurity.com
CAUTION!
This symbol indicates that failure to follow the safety instructions described may endanger
persons and cause damage to the unit or other equipment.
It is associated with immediate, direct hazards.
NOTICE!
This symbol refers to features and indicates tips and information for easier, more convenient
use of the unit.