Filter
Top Products
98 en | Appendix VOT-320
DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
8.5 Processor load
If the VOT-320 is accessed via the Web browser, you will see the processor load indicator in
the top left of the window next to the manufacturer's logo.
You can obtain additional information to help you when troubleshooting or fine tuning the
unit. The values indicate the proportions of the individual functions on the encoder load,
shown as percentages.
Move the cursor over the graphic indicator. Some additional numerical values are also
displayed.
8.6 Network connection
You can display information about the network connection. To do this, move the cursor over
the i icon.
8.7 Serial interface
Options for using the serial interface include transferring transparent data, controlling
connected units or operating the unit with a terminal program.
The serial interface supports the RS-232, RS-422 and RS-485 transmission standards. The
mode used depends on the current configuration (see Section 5.33 Advanced Mode: COM1,
page 68). Connection is via the upper 6-pin terminal block.
Link Ethernet link type
UL Uplink, speed of the outgoing data traffic
DL Downlink, speed of the incoming data traffic