Bosch Appliances VOT-320 Security Camera User Manual


 
VOT-320 Configuration using a Web browser | en 77
Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.5 | 2010.09
Increment
A number from 000 to 255 is added to the file name and automatically incremented by 1.
When it reaches 255 it starts again from 000.
Date/time suffix
The date and time are automatically added to the file name. When setting this parameter,
ensure that the camera's date and time are always correctly set. Example: the file
snap011005_114530.png was stored on October 1, 2005 at 11:45 and 30 seconds.
Posting interval
Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if
you do not want any images to be sent.
FTP server IP address
Enter the IP address of the FTP server.
FTP server login
Enter your login name for the FTP server.
FTP server password
Enter the password that gives you access to the FTP server.
Path on FTP server
Enter the exact path on the FTP server.
Max. bit rate
You can limit the bit rate for FTP posting.
5.38 Advanced Mode: Encryption
A special license, with which you will receive a corresponding activation key, is required to
encrypt user data. You can enter the activation key to release the function on the Licenses
page (see Section 5.40 Advanced Mode: Licenses, page 79).
5.39 Advanced Mode: Maintenance
Firmware
The VOT-320 is designed in such a way that its functions and parameters can be updated with
firmware. To do this, transfer the current firmware package to the camera via the selected
network. It will then be automatically installed there.