Filter
Top Products
28 en | Configuration using a Web browser VOT-320
DOC | V4.5 | 2010.09 Installation and Operating Manual Bosch Sicherheitssysteme GmbH
5.3 Basic Mode: Device Access
Camera name
The camera name makes it easier to identify the remote camera location, in the event of an
alarm for example. It will be displayed in the video screen if configured to do so (see
Section Camera name stamping, page 36). The camera name makes the task of administering
cameras in larger video monitoring systems easier, for example using the Bosch Video Client
or Bosch Video Management System programs.
Enter a unique, unambiguous name for the camera in this field.
Password
A VOT-320 is generally protected by a password to prevent unauthorized access to the
camera. You can use different authorization levels to limit access.
The VOT-320 operates with three authorization levels: service, user and live.
The highest authorization level is service. After entering the correct password, you can access
all the functions of the VOT-320 and change all configuration settings.
With the user authorization level, you can operate the camera, play back recordings and also
control cameras, for example, but you cannot change the configuration.
The lowest authorization level is live. It can only be used to view the live video image and
switch between the different live image displays.
You can define and change a password for each authorization level if you are logged in as
service or if the camera is not password protected.
Enter the password for the appropriate authorization level here. The maximum password text
length is 19 characters.
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal management.
CAUTION!
Do not use any special characters, for example &, in the password.
Special characters are not supported by the system's internal management.