Epson PhotoPC 600 Digital Camera User Manual


 
Handling batteries
When your PhotoPC 600 batteries wear out, you can
replace them with any of the following:
Single-use AA (LR6) alkaline batteries
Single-use AA (FR6) lithium batteries
(longest battery life)
Rechargeable AA Ni-Cd batteries
Rechargeable AA Ni-MH batteries
w
Warning:
To avoid the danger of fire or explosion, do not mix
different types of batteries. Do not allow the battery
contacts to touch metal objects such as coins or keys,
which could short out the battery’s circuits.
Note the following when handling batteries:
Do not use manganese batteries.
Replace all four batteries at the same time.
Do not drop, puncture, disassemble, or mutilate
batteries. Do not get them wet or expose them to fire.
When the camera is not used for long periods of
time, remove the batteries and store them at a low
temperature in a dry location.
Dispose of used batteries according to the battery
manufacturer’s instructions and in compliance with
all applicable laws. Contact your local government
agency for information about battery recycling and
disposal.
If you use rechargeable Ni-Cd or Ni-MH batteries,
replace them with four fully-charged batteries. If you
find that your batteries run out faster after you
recharge them a number of times, make sure you
discharge them completely before recharging.
Battery life varies depending on the battery type and
the manufacturer.
1
R
Poppy Rev.B/TCAT
A5 size Chapter 1
97/09/18 pass 7
Getting Started
16