Filter
Top Products
3. Connect the long cable to the short cable (Macintosh
adapter cable), then tighten the screws. Line up the
serial connector on the short cable with either the
modem or the printer port on your computer, and
insert the connector.
4. Open the connector cover on the side of the camera.
5. Depending on the type of cable you have, line up
either the arrow or the flat surface of the long cable
connector with the mark on the camera’s serial port.
Then insert the connector.
Macintosh adapter cable
serial cable
connector cover
flat surface
arrow surface
mark
3
R
Poppy Rev.B/TCAT
A5 size Chapter 3
97/09/18 pass 6
Using PhotoPC 600 with Your Computer
39