Filter
Top Products
6. Turn on the camera and your computer system.
c
Caution:
❏
If you connected the camera to a serial port that
you use for another device and AppleTalk is
turned on, turn off AppleTalk. The computer may
not recognize the camera if AppleTalk is turned on.
❏
Keep the entire computer system away from
potential sources of electromagnetic interference,
such as loudspeakers or the base units of cordless
telephones.
Accessing EPSON Photo!2
Once your camera and computer are connected and
turned on, you are ready to start working with the
EPSON Photo!2 software that came with PhotoPC 600.
This software allows you to download your photos to
your computer so that you can use them in your
documents.
If you have not installed EPSON Photo!2 yet, do so now,
following the instructions on page 17. Then follow the
instructions in this section to access the software.
Note:
If the camera’s clock was not set when you connected it to your
computer, the camera is set to your computer’s date and time
automatically after opening EPSON Photo!2.
For Windows users
To open EPSON Photo!2 directly, simply double-click its
icon in the EPSON Photo!2 program group (for Windows
3.1x and NT 3.51) or click its icon in the EPSON Photo!2
folder (for Windows 95 and NT 4.0).
To access EPSON Photo!2 from an application program
that supports the TWAIN image acquisition standard,
choose
EPSON PhotoPC 600
as the TWAIN data source
on your application’s File menu, then acquire the image.
To access EPSON Photo!2 from an application that
supports OLE2 (object linking and embedding), choose
EPSON PhotoPC 600 Object
on the Insert Object menu
and click
OK
.
3
R
Poppy Rev.B/TCAT
A5 size Chapter 3
97/09/18 pass 6
Using PhotoPC 600 with Your Computer
40