Filter
Top Products
2 Configure and manage the
scanner on a network
This section is intended for the administrator or individual responsible for managing the
network scanner.
You have the option to install the HP Scanjet N6350 on a network, where it can be shared
by up to 20 computers.
The following topics describe how to configure and manage your networked scanner.
•
Connect the scanner to a network
•
Change the scanner name
•
Connect to additional network scanners
•
Install the scanner software on additional computers
•
Manage the network scanner
Connect the scanner to a network
To connect the scanner to a host computer on an existing network, complete the following
steps.
1. Press the Power button to turn off the scanner.
2. Disconnect the USB cable from the scanner if it is connected.
3. Connect the scanner to a router (shown), Ethernet jack, or Ethernet switch using the
Ethernet cable.
4. Press the Power button to turn on the scanner.
Configure and manage the scanner on a network 19