Filter
Top Products
3. Click the Network tab.
4. Click the Check Status button.
Problems connecting to a wired network
• If the Link light on the network connector does not turn on, make sure you have
completed the items listed under Basic troubleshooting tips in this chapter.
• Though it is not recommended that you assign the device with a static IP address,
you might resolve some installation problems (such as a conflict with a personal
firewall) by doing so.
See also
“
Basic troubleshooting tips” on page 36
“
Change network setup type” on page 24
Additional troubleshooting information
For additional troubleshooting information, see the following resources:
• To look for updated information about the scanner, see
www.hp.com/support.
◦ Select your country/region, and then select your language.
◦ Enter the scanner model number, and then press Enter.
• If you do not have Internet access, see the information about getting assistance in
the printed Getting Started Guide for information on contacting HP support.
Additional troubleshooting information 53