Filter
Top Products
5. The wpsadmin ID and password are used to administer two servers in the Domino domain: the
Directory Server and IBM Lotus Sametime Connect.
6. This option enables Web Browsers (HTTP services), Internet Mail Clients (SMTP, POP3, and
IMAP services), and Directory Services (LDAP services) on the server.
7. The server's TCP/IP host name. It is recommended that you use the following convention:
servername.your_organization_domain_name. If you choose to use a different name, you
may need to update your Domain Name Server (DNS) definitions with the new Domino Server
host name.
Configuration Procedure
The Domino software provides a wizard to help you set up the server. Refer to the Table 13
on page 19
for help in choosing the values. To set up Domino, follow these general steps:
1. Use the Start menu to start the Lotus Domino Server program (Start -> Programs -> Lotus
Applications -> Lotus Domino Server).
2. Select Start Domino as a Windows service, make sure that Always start Domino as a
service at system startup and Don't ask me again are checked, and click OK.
3. Accept the default fonts.
4. Since this is the first server in the domain, select the option to Set up the first server or stand-
alone server (all future servers will select the option to Set up an additional server).
5. When prompted for the server name and title:
a. Enter a name for the Domino server (server host name recommended).
b. If you prefer, you can enter a short title/description for the Domino server (this is an optional
value and has no other effect on the server).
c. Leave I want to use an existing server ID file unselected.
6. When prompted for the organization name:
a. Enter the organization name for this infrastructure.
b. Enter a password for the certifier file (twice for confirmation).
c. Leave I want to use an existing server ID file unselected.
7. When prompted for the Domino domain name:
a. Enter the Domino domain name for this installation.
8. When prompted for an Administrator name and password:
a. Enter the name of the first Domino Administrator (
Portal Express Server Administrator). If
you are using a generic account name such as wpsadmin, fill in only the Last name field.
b. Enter a password for this account (twice for confirmation).
c. Select the box to save a local copy of the ID file and change the location for saving it, if
desired.
9. When prompted to specify Internet services:
a. Select HTTP and LDAP.
b. Do not select IMAP, POP3, and/or SMTP (they can be enabled later on specific servers, if
needed).
10. On the Domino network settings page, click the Customize button to configure the port drivers
and host name:
a. Deselect NetBIOS ports.
20 Collaborative Portal: Implementation Guide