Filter
Top Products
11. In the new file, at the end of the line, add the internet password for the user ID (that was entered
for CS_SERVER_DOMINO_DIRECTORY_1.userid).
12. Save and close the new file as dominobind.txt in the <was_profile_root> directory.
13. Open a command prompt to the <was_profile_root>\bin directory.
14. In the same directory, run the following command (type as one line with a space character
separating it):
PropFilePasswordEncoder dominobind.txt
CS_SERVER_DOMINO_DIRECTORY_1.encryptedpwd
15. In the same directory, open the dominobind.txt file, and copy the encrypted password after
CS_SERVER_DOMINO_DIRECTORY_1.encryptedpwd=
16. Go back to the CSEnvironment.properties file.
17. Paste the encrypted password after CS_SERVER_DOMINO_DIRECTORY_1.encryptedpwd=
18. Save and close the CSEnvironment.properties file.
19. Close and delete the dominobind.txt file (and dominobind.bak file if it exists).
20. Use the following command to start the IBM WebSphere Portal Express server:
a. Open a command prompt and change to the directory: <was_profile_root>\bin
b. Enter the following command: startserver.bat WebSphere_Portal
Note: This command is case sensitive.
21. After the Portal Server is started, login to the portal as a user (for example, tuser1) and go to
the Domino Web Access Welcome page. (From the Portal home page, click Launch and then
Domino Integration to go to the Domino Integration Welcome page.)
22. Click the My Work tab, and you should see your Lotus mail in the Domino Web Access portal
window.
Enable Web Conferencing
Perform the following steps to enable Web conferencing:
1. Login to the portal using a Portal administrator ID (for example, wpsadmin) and password.
2. Open the Administration page by clicking Launch and then Administration.
3. Select Portlets from Portlet Management.
4. In the search box, enter Lotus Web Conferencing and then click Search.
5. Click the Configure Portlet icon on the line where it displays Lotus Web Conferencing.
6. Click the edit parameters icon on the line that displays SametimeServer1 and enter the
hostname of your Sametime server (for example, sametime.mynetwork.com).
7. Click OK.
8. Repeat steps 6 and 7 to enter the SametimeUserName1 and SametimePassword1 fields (for
example, wpsadmin and your password).
9. Logout and login again using a non-administrator ID and password (for example, tuser2).
10. Click Launch and then Domino Integration to go the Domino Integration page.
11. Click the My Team tab and you should see the Lotus Web Conferencing portal window where
you can start or find a meeting to attend.
46 Collaborative Portal: Implementation Guide