Filter
Top Products
Set up the IBM Lotus Sametime Connect
Perform this task on the Sametime Connect Server.
This section describes how to set up the IBM Lotus Sametime Connect. As with the Directory Server,
installation of a standard IBM Lotus Sametime Connect (Sametime) server is straightforward. The
procedure for installing a Sametime server into a Domino infrastructure is provided below.
IMPORTANT: Sametime requires that the Domino executables and data files reside on the same
drive. If you did not configure the underlying Domino server this way you need to reinstall it so it can host
the Sametime server.
Before You Begin
IMPORTANT: It is critical that all servers are set up for the same time and date in order for Single
Sign-On to work.
Installation Procedure
Perform the following steps:
1. Stop the Domino server on which Sametime will be installed.
2. Use the Sametime 7.5 CD or expand the downloaded file (C90MQML.EXE) and run demo32.exe
to install the Sametime code.
3. Select your language.
4. Click Install the Sametime Server.
5. Accept the license agreement.
6. Select the directory to use for collaboration by placing a check mark next to Domino Directory
(not LDAP Directory).
7. Select to allow HTTP tunneling on a Sametime server with a single IP address: place check mark
on the Enable line.
8. Verify that the installation directories match the Domino server directories and allow the
installation to continue; when prompted, click Finish.
9. Obtain the Sametime 7.5 Server Cumulative Fix Pack 1 (CF1) for Windows Multilingual file
(C96M1ML.ZIP) and expand it to a temporary folder location. Then expand the win_bin.zip
file and copy the content into the Domino Program Directory (c:\Lotus\Domino), and expand
the win_data.zip file and copy the content into the Domino server data directory
(c:\Lotus\Domino\Data).
10. Update the configuration:
a. Update the serlets.properties file so UnserInfoServlet is initialized when the HTTP
services loads. The file is located at c:\Lotus\Domino\Data\servlets.properties.
b. Locate the line in the file that begins with servlets.startup=.
31 Collaborative Portal: Implementation Guide